[Jukebox-list] R83 Gripper

[Alan-hood at datex.co.uk]

Hello,

 

You need to check out all of your adjustments as per the manual for the
gripper bow assembly, gears and tone arm assembly.

If all of these check out look for wear on the tone arm cam and also check
out the Crank & Pin assembly (202-10807) the pawl on this casting can become
loose, the effect is an eccentric circle so the timing is always out.

A slight tap with an hammer on the pawl rivet usually sorts it out.

 

Regards

Alan Hood

ami-man

UK

alan-hood at datex.co.uk 

____________________________________________________________________
DISCLAIMER 
The information and any attachment with this message is confidential and may
be privileged. It is for the exclusive use of the intended recipient(s). If
you are not the intended recipient(s) please notify the sender and delete
the message immediately. Unauthorised disclosure, distribution and copying
of this email are strictly prohibited The opinions expressed within this
message are those of the individual author. Whilst Datex Systems takes
reasonable steps to scan this email it does not accept liability for any
virus that may be contained in it. 
____________________________________________________________________