[Jukebox-list] Re: 222 Seeburg components

[Joey McDonald]

Thanks for the info Ron, Jay and everyone else.

Joey McDonald

----- Original Message ----- 
From: "Ron Rich" <ronnnrich at yahoo.com>
To: <jukebox-list at lists.netlojix.com>
Sent: Thursday, January 03, 2008 11:26 AM
Subject: [Jukebox-list] Re: 222 Seeburg components


> Hi Joey,
>  A 222 should have a TSU-1 (Tormat Selection Unit) equipped with either a 
> TJU-2 (Tormat Junction Unit) (cover plate), or an RCSU-2 ("stepper"). 
> However, any TSU should work. The RCSU-2 was available either "factory 
> installed", in which case the I.D. plate, on the rear of the cabinet, 
> would have been stamped with a "R" (for "Remote operation possible"). It 
> was also available as a "kit", either Distrib. installed, or operator 
> installed.
>  As for the amp---They are somewhat difficult to re-cap, due to the fact 
> that they are almost two seperate single amps "crammed" into one chassis. 
> I have never seen any "transistor replacement amps" used in a 222. What I 
> have seen is the later amps (SHFA-4 and 5) used as replacements, as 
> Seeburg "simplifed" the later models, using fewer components. Sound wise, 
> I could never tell the difference, if the amp was "good".  Ron Rich
>
>
> ---------------------------------
> Never miss a thing.   Make Yahoo your homepage.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1208 - Release Date: 1/3/2008 
> 3:52 PM
>
>