[Jukebox-list] AMI Remote Volume Control

[The Roths]

I have a model 306-06322 ??? (numbers are very hard to read) remote volume
control.  It says it is for model R-3801A, 602-04359 Stereo amplifiers.  Can
anybody tell me what models this might work with.  I think the R-3801A
amplifier was used around the TI-1 series but am not sure.  The wire
currently connected to the volume control consists of a red and blue
shielded pair, a yellow and green shielded pair, and an orange unshielded
single wire.  Based on the schematic on the back of the control I do not
think this is correct.  I also have some wire I got from the operator
consisting of the following:  blue and white unshielded, yellow, black, red,
and green wrapped in a very thin metal shield film, and a bare stranded wire
in contact with the metal shield film.  Based on the schematic, I think this
may be the correct wire.  Finally, from the same operator, I have some seven
strand wire with the following colors:  white, green, blue, black, red,
orange, and brown.  None are shielded.  I don’t think this is for the volume
control but would it have possibly have been used for a wallbox application?
Any information appreciated.

 

Brian Roth


No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.19.7/1232 - Release Date: 1/18/2008
7:32 PM