[Jukebox-list] Ballast wiring
Jay Hennigan
jay at west.net
Thu Mar 6 19:55:38 PST 2008
Joey McDonald wrote:
> Hello all. The ballast I ordered from Victory Glass arrived. It is an Advance LC25 ballast that requires a starter.
> Here is a spec sheet on it with schematic link.
> http://www.1000bulbs.com/F25T12-Fluorescent-Ballast/28102/
>
> I am unclear as to how to wire it. The shematic that came with it shows the ballast wired in series with one side of the lamp. That I understand. The ballast has only 2 black wires.
> One is 7" long and the other is 22" long. The schematic shows a black to line voltage and the
> other black to the lamp. The schematic reads black as line and black to the lamp.
> The leads are not marked. Just both black. I don't know how to tell what black goes to line and what black goes to the lamp.
> Is the length of the wire and indication of line and load?
The ballast is simply an inductor. The wires are interchangeable.
Power Switch +-----------+
Line 1 (H) o------/ ---------| Ballast |-----------+
+-----------+ |
|
|
.--------------------------. |
Line 2 (N) o---------|- Fluorescent -|----+
| ) Tube ( |
+---|- -|----+
| '--------------------------' |
| |
+--------------o/ o-----------------+
Starter
> Also, the ballast itself must be grounded. Does this mean one neutral to the lamp and then also paralled off and secured to the ballast metal body? I hope I don't sound too confusing.
If you have a three-wire cord, connect the green wire to one of the
mounting screws. Otherwise leave the case electrically isolated.
--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
More information about the Jukebox-list
mailing list