[Jukebox-list] Ami E-120 Color wheel cylinder/ color replacement ???????

[Carmack]

I'm working on an E120 too....Got new cylinders at Victory Glass.  
There's another thread I picked up on the list about those things that 
proved immensely helpful -- use clear silicon caulk along the inside of 
the endcaps to keep the cylinders in the proper form. They try to pop 
out of the endcaps like mad.  Also use some scotch tape in the middle of 
the "roll" to keep it from bulging until the caulk sets.  I still 
haven't figured out what to do about the drive wheels on the animation 
motors.  They got sanded to somewhat resurface them but they're still 
hard as a rock.  I'm thinking a plumbing O-ring might work, but mine are 
working okay for now.

Mike

SodaWanted at aol.com wrote:
> Hello all, what should I use to replace the colors on the cylinder's on  this 
> machine? They are old and faded out? Thanks a Lot.  :-)
>
>
>
> **************It's Tax Time! Get tips, forms, and advice on AOL Money & 
> Finance.      (http://money.aol.com/tax?NCID=aolprf00030000000001)
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>