[Jukebox-list] Seeburg Q... where's the service/scan switch???

[jhayes2613 at aol.com]

You know... the cord is still there and intact, with the exception of the missing plug. Couldn't I just get a new plug and attach it to the existing wires?


-----Original Message-----
From: Ron Rich <ronnnrich at yahoo.com>
To: jhayes2613 at aol.com
Sent: Tue, 6 May 2008 10:53 am
Subject: Re: [Jukebox-list] Seeburg Q... where's the service/scan switch???



Hi John,
There ain't no "DUH" questions !
I would suggest that you buy a two wire cord. That machine was not designed with 
a ground circuit, and in my opinion, is safer without one. It is nearly 
impossible to add the TOTAL wiring needed to "ground" a machine that was not 
designed as such. I suggest that a GFI circuit be used instead. BTW, If the 
original "wall plug" is in that cabinet, the white wire goes to the silver 
screw, and the black wire to the "gold" screw.
As for the cord exit--I really don't recall that model. It seems to me that it 
has a round hole in the rear of the cabinet, and it used a "rubber grommet" 
attached to the cord, to "mouse proof" the hole. I know the later "Y" models 
did.


--- On Tue, 5/6/08, jhayes2613 at aol.com <jhayes2613 at aol.com> wrote:

> From: jhayes2613 at aol.com <jhayes2613 at aol.com>
> Subject: Re: [Jukebox-list] Seeburg Q... where's the service/scan switch???
> To: ronnnrich at yahoo.com, jukebox-list at lists.netlojix.com
> Date: Tuesday, May 6, 2008, 4:45 AM
> That was a bit of a "DUH" question... (anyway,
> thanks, Ron.) And here's another: this power cord has
> been severed and needs a replacement. I'm going to
> purchase a three-prong extension cord at Home Depot (along
> with some flourescent bulbs... 28 inch, right? Mine are
> missing) and if memory serves, aren't there three wires
> in these heavy-duty cords?? And only two wires connect to
> the power supply, right? What do I do with the third wire?
> Will I able to determine which two wires connect to the
> box? And as the juke came to me without a back door and
> I've been putting a Frankenstein together, where does
> the cord lead out of the back of the machine? There is no
> "power cord hole" in this back door.
> Many thanks-
> John Hayes
> 
> 
> -----Original Message-----
> From: Ron Rich <ronnnrich at yahoo.com>
> To: Jukebox mailing list
> <jukebox-list at lists.netlojix.com>
> Sent: Mon, 5 May 2008 11:35 am
> Subject: Re: [Jukebox-list] Seeburg Q... where's the
> service/scan switch???
> John, Left hand corner --up near the TES Ron Rich
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ