[Jukebox-list] 1960 Seeburg Magazine Rack Removal

[John Robertson]

jhayes2613 at aol.com wrote:
> Okay, anyone ever have this problem before?-- The magazine rack and mech will NOT slide out of the back of the machine. The reason? The right side of the unit catches big time on the right side of the opening. I've tried different angles, I've tried huffing, I've tried puffing. It catches on the right side of the panel big time. It's almost as if the wood and/or the doorway has gotten smaller over the years. The doorway is not wide enough. Possible? At any rate, about all I can suggest for myself is sanding the side down, at least the one area where the edge of the rack is supposed to slide out and not catch. Or, I can try the right/left/right dragging method but the left side tends to catch on the prop rod.
>   

You CAN take the assembly out the back on your Q-160 - after all the 
factory PUT IT IN that way! Try moving the mechanism to the center 
position and then removing the right side metal cover from the front of 
the magazine... also try moving the magazine on a slight angle if needed.

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"